Hi,
If you are using 2 camera in the network and you want to access the camera remotely via solo link, Here is the thing you need to do:
- Configure the 1st camera with same wireless settings from the router with the follwing:
- Same Wireless setting should be setup to the WVC54G
- IP Address of 192.168.1.116
- Default Gateway: 192.168.1.1
- Subnet Mask: 255.255.255.0
- DNS: Valid DNS from the Status page of your Router
- Go to Options Tab and select UPNP Enable
- Enable Alternate port and change the port to (1025-65534) which should be unique from any devices used.
- Go to the linksys router setup page
- Enable port forwarding for port 1025 into an ip address of 192.168.1.116
- Then Go to the Solo Link DDNS Tab of the Camera
- Input the username and password needed
- Change the WAN port to 1025
- DDNS update should be Every 15 min
- Make sure that the Status of the DDNS should state Registered and Connected
- By then you should be able to access your camera via Domain Name through the following pattern (cameraname.DNS you registered.ourlinksys.com )
With regards to the second WVC Camera
Configure the 1st camera with same wireless settings from the router with the follwing: - Same Wireless setting should be setup to the WVC54G
- IP Address of 192.168.1.115
- Default Gateway: 192.168.1.1
- Subnet Mask: 255.255.255.0
- DNS: Valid DNS from the Status page of your Router
- Go to Options Tab and select UPNP Enable
- Enable Alternate port and change the port to (1024) which should be unique from any devices used.
- Go to the linksys router setup page
- Enable port forwarding for port 1025 into an ip address of 192.168.1.115
- Then Go to the Solo Link DDNS Tab of the Camera
- Input the username and password needed
- Change the WAN port to 1024
- DDNS update should be Every 15 min
- Make sure that the Status of the DDNS should state Registered and Connected
By then you should be able to access your camera via Domain Name through the following pattern (cameraname.DNS you registered.ourlinksys.com )Hope i was able to help you with your concern.
Until then,
Bentuzal